1. Home
  2. Phoenix Contact Controllers & IO Modules
  3. Commissioning a Phoenix contact ILC 2050 BI in Niagara 4

Commissioning a Phoenix contact ILC 2050 BI in Niagara 4

Before you can commission a Phoenix Contact ILC2050 in Niagara, you need to download some additional software. This guide will help you through the process.

The first thing to do is to download the N4 Emalytics HW / Niagara Addons Support software for the version of Niagara you are using. This can be found on the Phoenix Contact product page below. The current release is under ‘Software’, previous releases are under ‘Software Archive’.


Once it is downloaded run the program.

Go through the steps and select the version on N4 you are running, click next and then install.

It will then complete the set up and you can click finish.

Once completed, run the platform daemon and open workbench, connect to the ILC.
Default credentials are below.

Once you have done all that it will be ready to start the commissioning wizard as usual.

Updated on August 9, 2022

Was this article helpful?

Existing Customer?
Need some technical support from the One Sight team?